• Şerifali Mah. Hendem Cad. No:38 D:2 Ümraniye/İstanbul

Kehui Electric T100C

Manufacturer KEHUI
Model T100C                                 

The T-100C high voltage signal generator is capable of generating high voltage DC and high voltage cyclic signals. The high voltage DC can be used to pressure test the cable sheath, prior to fault location, and as a final check, once a repair has been carried out. It can also be used to indicate leakage current to help to determine the nature of the fault.

The T-100C can be used in conjunction with the T-H200 cable sheath fault locator, to provide a pre-location of cable sheath faults. When used with a cyclic output, the T-100C can be used with the T-KF100 cable sheath fault pinpointer to find the precise location of the fault, using the pool of potential method. For cables laid in troughs or pipes, the T-100C/T-KF100 combination can also be used to segment the cables to allow the faulted section to be identified.

The signal generator has two working modes: DC output and intermittent characteristic high voltage pulse output. The DC output can be used as the power supply for the DC resistance method rangefinder T-H100, and can be used for the withstand voltage test of the cable sheath and the burn-through of the sheath fault. The intermittent characteristic high voltage pulse output mode can be used for sheath fault segmentation and fault location.

Intermittent characteristic: The high-voltage pulse signal is an ultra-low frequency signal, which avoids the influence of the distributed capacitance of the system and can accurately locate the high-resistance fault of the sheath.

With high-voltage start-up blocking function to ensure the safety of operators.

The signal generator has an overload protection function and an output current limit function that allows direct short-circuit operation.

The signal generator is small, light-weight and easy to use.

  • Output characteristics: DC output: The open circuit voltage is adjustable from 0 to 10kv, and the short-circuit current is adjustable from 0 to 80mA. Cyclic output: frequency 1Hz, open circuit voltage peak 0 - 10kv adjustable, short circuit current peak 0 - 80mA adjustable.
  • Power output: ≥ 1000W).
  • Maximum power consumption: 800Wmaximum power
  • Dimensions: Signal generator 455 × 335 × 310mm
  • Weight: 15kg
  • Charger power supply: AC 220V ± %10 50Hz ± 2Hz
  • Conditions of use: Temperature: -10 - 50°C; humidity 5-90% RH; altitude <4500 m
Product Options
programma ragnar 25

Programma Ragnar 25

Phase SHITTER Test Device

twpd-2623

TWPD-2623

Portable PD Detector

bagela bha200/10

Bagela BHA200/10

Hydraulic Cable Pusher

himalayal

Himalayal

Yüksek Gerilim Test Cihazı

skf cmas 100-sl

SKF CMAS 100-SL

Noise Meter

skf tmrt 1

SKF TMRT 1

Laser Tachometer Device